Flex I/O Card Port Module Srx-Ioc-4Xge-Xfp Specifications - Juniper SRX5400 Hardware Manual

Serial Number Location

Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-4XGE-XFP port module
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
Figure 67: Flex IOC Port Module SRX-IOC-4XGE-XFP
Description
Software release
The serial number label is located as shown in
Figure 66: Port Module SRX-IOC-16GE-TX Serial Number Label
Port module with four 10-Gigabit Ethernet XFP ports
Maximum throughput: 10 Gbps
Oversubscription ratio: 4:1
Maximum configurable MTU: 9192 bytes
Junos OS Release 9.5R1 and later
Figure 66 on page
Serial number
ID label
JX0123
142.
(Figure 67 on page 142)
142