1-Port Serial Mini-Physical Interface Module (SRX-MP-1SERIAL-R) Hardware Specifications
1-Port Serial Mini-Physical Interface Module (SRX-MP-1SERIAL-R) LEDs
1-Port Serial Mini-Physical Interface Module Interface Cables
Copyright © 2016, Juniper Networks, Inc.
RS-232
RS-449
Table 17 on page 33
lists the physical specifications of the 1-Port Serial Mini-Physical
Interface Module (Mini-PIM).
Table 17: 1-Port Serial Mini-PIM (SRX-MP-1SERIAL-R) Physical
Specifications
Description
Dimensions (H x W x L)
Weight
Connector type
Form factor
The 1-Port Serial Mini-Physical Interface Module (Mini-PIM) has one LED located to the
right of the serial port.
Table 18 on page 33
Table 18: 1-Port Serial Mini-PIM (SRX-MP-1SERIAL-R) LED States
Name
Color
STATUS
Green
Table 19 on page 33
lists the cables that you can order from Juniper Networks to connect
to a port on the synchronous 1-Port Serial Mini-Physical Interface Module (Mini-PIM).
The device to which you are connecting and the serial interface types determine which
type of cable you need.
Table 19: Juniper Networks Serial Cables
Product Number
JX-CBL-EIA530-DCE
JX-CBL-EIA530-DTE
Value
0.8 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm)
3.04 oz (86 g)
60-pin Synchronous Serial (female)
Mini-PIM
describes the LED states.
State
Description
On
Online with no alarms or failures.
Off
Device has detected a failure.
Interface Type
Length
EIA530 cable (DCE)
3.04 m (10 ft)
EIA530 cable (DTE)
3.04 m (10 ft)
Chapter 3: Interface Module Description
Connector
Type
Female
Male
33