Flex I/O Card Port Module Srx-Ioc-4Xge-Xfp Specifications - Juniper SRX5400 Manual

Services gateway card reference
Hide thumbs Also See for SRX5400:
Table of Contents

Advertisement

Serial Number Location

Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-4XGE-XFP port module
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
Figure 17: Flex IOC Port Module SRX-IOC-4XGE-XFP
Description
Software release
Cables and connectors
The serial number label is located as shown in
Figure 16: Port Module SRX-IOC-16GE-TX Serial Number Label
Port module with four 10-Gigabit Ethernet XFP ports
Maximum throughput: 10 Gbps
Oversubscription ratio: 4:1
Maximum configurable MTU: 9192 bytes
Junos OS Release 9.5R1 and later
4 XFP Ethernet ports
Supported XFP transceivers:
10GBASE-ER (model numbers SRX-XFP-10GE-ER and SRX-XFP-10GE-ER-ET )
10GBASE-LR (model numbers SRX-XFP-10GE-LR and SRX-XFP-10GE-LR-ET
10GBASE-SR (model numbers SRX-XFP-10GE-SR and SRX-XFP-10GE-SR-ET )
Figure 16 on page
Serial number
ID label
JX0123
34.
(Figure 17 on page
34)
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx5600Srx 5800

Table of Contents