Srx 210 Services Gateway 1-Port Sfp Mini-Physical Interface Module; 1-Port Sfp Mini-Physical Interface Module - Juniper SRX 210 Services Hardware Manual

SRX 210 Services Gateway Hardware Guide
Related Topics

SRX 210 Services Gateway 1-Port SFP Mini-Physical Interface Module

This section includes the following topic:

1-Port SFP Mini-Physical Interface Module

The 1-Port Small Form factor Pluggable (SFP) Mini-Physical Interface Module
(Mini-PIM) provides connectivity to a single Gigabit Ethernet device or network.
Figure 6 on page 27 shows the front panel of 1-Port SFP Mini-PIM front panel.
26
SRX 210 Services Gateway 1-Port SFP Mini-Physical Interface Module
1:3 or 1 in 4 pattern
1:7 or 1 in 8 pattern
3:24 - 3 bits set in every 24 bits
QRSS20 (Modified PRBS 2^20-1, with 14 zero suppression)
PRBS 2^7-1 - PRBS 2^9-1 (as specified in ITU-T O.153)
PRBS 2^11-1 (as specified in ITU-T O.153)/2047 pattern
PRBS 2^15-1 (as specified in ITU-T O.151/O.153)
PRBS 2^20-1 (as specified in ITU-T O.153)
Programmable word or 32-bit programmable pattern
Network (T1) alarms
LOS, LOF, AIS, YLW
Mini-Physical Interface Modules on the SRX 210 Services Gateway on page 22
SRX 210 Services Gateway 1-Port SFP Mini-Physical Interface Module on page 26
SRX 210 Services Gateway ADSL 2+ Mini-Physical Interface Module on page 29
Removing a Mini-Physical Interface Module from the SRX 210 Services
Gateway on page 117
Installing a Mini-Physical Interface Module in the SRX 210 Services
Gateway on page 118
1-Port SFP Mini-Physical Interface Module on page 26