Installing The T4000 Rear Fan Tray; Figure 106: Removing The Fan-R-Txp-3D-Lcc Rear Fan Tray - Juniper T4000 Hardware Manual

See Also

Installing the T4000 Rear Fan Tray

Copyright © 2018, Juniper Networks, Inc.

Figure 106: Removing the FAN-R-TXP-3D-LCC Rear Fan Tray

To install a replacement rear fan tray (see
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Grasp the fan tray by its handles, and insert it straight into the chassis.
2.
Tighten the captive screws on the fan tray faceplate to secure it in the chassis, using
3.
a Phillips (+) screwdriver, number 2.
Chapter 28: Replacing Cooling System Components
Figure 107 on page 272):
271