Holding And Storing M40E Fpcs; Holding An M40E Fpc Overview - Juniper M40E Hardware Manual

Action
Related
Documentation

Holding and Storing M40e FPCs

Holding an M40e FPC Overview

Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
The router can have up to eight Flexible PIC Concentrators (FPCs) mounted vertically in
the FPC card cage at the front of the chassis, as shown in "M40e Chassis Description"
on page 8. To maintain FPCs, regularly:
Check the LCD on the craft interface and the LEDs on the craft interface directly above
each FPC slot. The green LED labeled
normally. For more information, see "FPC LEDs and Controls on the M40e Craft
Interface" on page 38.
Issue the CLI
show chassis fpc
shown in the sample output, the value
that the FPC is functioning normally:
user@host> show chassis fpc
Temp
Slot State (C)
0 Online
1 Empty
2 Offline
3 Empty
4 Online
5 Online
6 Online
7 Empty
FPC LEDs and Controls on the M40e Craft Interface on page 38
M40e FPCs Supported on page 17
Holding an M40e FPC Overview on page 133
M40e Flexible PIC Concentrators (FPCs) Description on page 13
Holding an M40e FPC Overview on page 133
Holding an M40e FPC Vertically on page 136
Holding an M40e FPC Horizontally on page 137
Storing an M40e FPC on page 138
CAUTION: To prevent damage when handling or carrying FPCs, observe the
following precautions.
NOTE: An FPC configured with PICs installed can weigh as much as 15 lb
(6.8 kg). Be prepared to accept the full weight of the FPC as you lift it.
Chapter 14: Maintaining M40e Router Hardware Components
lights steadily when an FPC is functioning
OK
command to check the status of installed FPCs. As
in the column labeled
Online
CPU Utilization (%)
Total Interrupt
37 4 0
-- FPC not supported on platform --
34 1 0
35 4 0
39 4 0
indicates
State
Memory Utilization (%)
DRAM (MB) Heap Buffer
32 2 40
32 1 40
32 2 40
32 1 39
133