Mx2008 Seven-Feed Single Phase Ac Power Distribution Module Description - Juniper MX2008 Hardware Manual

Figure 28: Nine-Feed Single-Phase AC Power Distribution Module
CAUTION:
before connecting the input power cables. If the PDM must be removed, all input
power cables must be removed from the PDM before the PDM can be removed from
the chassis.
SEE ALSO
MX2008 Power System Description | 58
MX2008 AC Power System Electrical Specifications | 85
MX2008 AC Power Cord Specifications | 82
MX2008 Seven-Feed Single Phase AC Power Distribution Module
Description
Each single-phase seven-feed AC PDM weighs approximately 12 lb (5.44 kg). The front of the PDM has
seven type C21 power cord connections for connecting single-phase AC power.
shows the single-phase seven-feed AC PDM.
Figure 29: Seven Feed Single Phase AC Power Distribution Module
SEE ALSO
The single-phase AC PDM must be installed and secured in the chassis
Figure 29 on page 72
72