Table of Contents
Advertisement
2.2 Replacing the fender mounting assembly
4. Remove the 4 self-piercing rivets joining the fender
mounting and the lower reinforcement base.
•
2 on outer side of vehicle.
•
2 on inner side of vehicle.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
5. Remove the 4 structural rivets joining the fender
mounting and the lower reinforcement base.
•
2 on outer side of vehicle.
•
2 on inner side of vehicle.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
Copyright ©
2010
4
5
4
5
Advertisement
Table of Contents
