EPB electric parking brake
Refitting the EPB electric parking brake shoes
Tightening torque
Fastening EPB Bowden cable - rear hub carrier
Fastening brake pad sensor ground cable
Release the spring (12) and remove the brake
shoes (E), taking care not to shift the linkage
pins (13).
Screw
Nut
Fit the linkage (13) correctly and install the brake
shoes (E) in the respective seats, with the spring
(12) already attached to one of the shoes.
Using suitable pliers, attach the spring (12) to the
other shoe (E).
Page 7 of 17
Nm
Class
8 Nm
B
6 Nm
B