Fuel tank
Disconnect the connector (4).
Undo the screw indicated by the red arrow on the
ground cable (5).
Disconnect the pipes (6).
There are two "double-lock" safety clips fitted onto
the unions.
To disconnect the "double-lock" quick connector,
using due caution and by pressing on both sides,
push the safety clip out of its seat until you hear
the "unclick".
The difference between the safety clip "clicked"
and "unclicked" position is only a few
millimetres.
Then press on both sides of the quick couplings and
remove the pipes (6).
Detach the indicated clamps.
Move the pipes (1) aside so that they do not hinder
the subsequent operations.
Undo the indicated fasteners.
Remove the lower heat shield (2).
Page 7 of 12