Table of Contents
Advertisement
Tyre pressure monitoring system
When the instrument panel receives the signal from the electronic control unit indicating that the pressure of one
or more RUN FLAT tyres is below the alarm threshold, but the system cannot recognise which wheel is
generating the fault signal, the TFT display displays the specific message "Low tyre pressure" together with
the message "Max speed 80 Km/h" without the vehicle symbol.
The system warns the driver and displays the specific screen if the vehicle speed exceeds 80 Km/h (50 mph)
while in "punctured tyre" state.
When the instrument panel receives the signal from the electronic control unit indicating that the pressure of one
or more RUN FLAT tyres is below the alarm threshold, the TFT display displays the specific message "Low
tyre pressure" together with the message "Max speed 80 Km/h" and the vehicle symbol indicating tyre
pressures.
The system warns the driver and displays the specific screen if the vehicle speed exceeds 80 Km/h (50 mph)
while in "punctured tyre" state.
The instrument panel also calculates (but does not display) the remaining range in Km (or mi) and repeats the
warning after 50 Km (31 mi).
In the event of a puncture to another tyre, the instrument calculates (but does not display) the updated
remaining range in Km (mi), in relation to the distance driven since the previous puncture event.
After the display cycle for the screen is complete, the screen disappears, but the relative indicator light remains
lit continuously.
Pressing the "Escape" function key during the display of faults with priority 0 (standard type tyre puncture) or
priority 1/ 2 (RUN FLAT tyre puncture, with speed limit not exceeded and with tyres still in usable condition)
Page 7 of 20
Advertisement
Table of Contents
