Table of Contents
Advertisement
Flywheel
Print Exit
C4.02
Flywheel
Removing the flywheel
Located inside the transmission housing and connected to the crankshaft.
Remove the complete gearbox (
Refitting the flywheel
Tightening torque
Fastening flywheel to crankshaft
C2.02).
Immobilise the crankshaft.
Undo the eight screws indicated fastening the
engine flywheel (A).
Undo the screws in a crossed pattern, by undoing
one screw first and then the opposite screw.
Note that while the starter motor has been
removed in the photo aside, its removal is not
necessary.
Remove the engine flywheel (A) from under the
vehicle.
Pretightening torque for
screw
Screw
Page 1 of 2
Nm
Class
45 Nm
0
91 Nm
A
Advertisement
Table of Contents
