Table of Contents
Advertisement
Engine oil pump
Tightening torque
Fastening engine oil recovery and pick-up pipe
Oil pump - crankcase
Fastening oil pump bush retainer bracket
Before refitting the oil pump, replace all the gaskets as follows.
Screw
Screw
Screw
Remove the mesh filter (14) from the relative seat
on the lower housing of the engine oil tank and
blow with compressed air to remove any
contamination or dirt; replace if necessary.
Then refit in the relative seat.
Replace and lubricate the gasket (15) on the lower
engine oil tank housing.
Page 4 of 8
Nm
Class
10 Nm
B
25 Nm
B
10 Nm
B
Advertisement
Table of Contents
