Table of Contents
Advertisement
Print Exit
A3.22
Checking vehicle set-up
Checking vehicle set-up
The following operations must be performed beforehand to ensure that vehicle set-up parameters are checked
correctly
Check that the tyre pressure is correct.
Check the steering and transmission system components.
Ensure that there is no backlash between the ball tie-rod of the steering box and the stub axle, and between
the ball tie-rod and the rear hub holder.
Check the state of the protective gaiters on the steering box tie-rods, on the toe-in tie-rod and on the axle
shaft tie-rods.
For optimum vehicle performance, the set-up procedure must be performed accurately.
Check that all suspension components are in proper working order.
Check the set-up data.
Vehicle set-up procedure
Important: for proper use see (
For optimum vehicle performance, the set-up procedure must be performed accurately.
D4.07)
Advertisement
Table of Contents
