Print Exit; Technical Specifications; Engine Specifications; Main Engine Specifications - Ferrari 458 Italia Technical Documentation Manual

Hide thumbs Also See for 458 Italia:

Table of Contents

Print Exit

Technical specifications

The engine is a naturally aspirated V8 with a 180° crank.

variable valve timing with continuous high pressure timing adjuster mechanism on all camshafts;

timing chains (one per cylinder bank) with hydraulic chain tensioners;

four overhead composite camshafts (two per cylinder bank) and four valves per cylinder with self-adjusting

hydraulic tappets;

chain driven water pump (integrated in front timing cover) and oil pump;

oil-water heat exchanger incorporated in crankcase, between the two cylinder banks;

the following components are mounted on the engine: the air conditioner compressor, the power steering

pump and the alternator, all of which driven by the crankshaft via a belt;

the engine is cooled by a circuit containing an antifreeze mixture.

Number of cylinders

Cylinder bore

Piston stroke

Total displacement

Compression ratio

Max. engine speed

(at rev limiter)

Maximum power (Dir.

Corresponding rpm

Maximum torque (Dir.

398.23 ft. lb.

Corresponding rpm