Table of Contents
Advertisement
Removing the complete engine
Remove the right hand front heat shield (11),
undoing the indicated screws.
Remove the right hand rear heat shield (12),
undoing the screws indicated by the red arrows.
Follow the same procedure to remove the front and
rear heat shields on the left-hand side of the
engine.
Remove the heat shields (37) from above the
engine mounting bushes on both sides, undoing
the screws indicated.
Tighten the eyebolts (elements 27) of the hook
(AV
3432) into the specific seats (13) at the front
of the engine.
Note that the heat shield is still fitted in the photo
aside. The heat shield must be removed.
Page 23 of 26
Advertisement
Table of Contents
