Table of Contents
Advertisement
Stabiliser bars - Tie-rods
Refit the wheels (
D2.01).
Replacing front spherical tie-rods
Tightening torque
Spherical tie-rod - lower arm
Fastening front stabiliser bar to tie-rod
Remove the wheels (
Spherical tie-rod
Nut
D2.01).
Fit and tighten the nut (1) fastening the stabiliser
bar (A) to the spherical tie-rod (2).
Tightening torque
Nut
Undo the nut (1), retrieving the relevant washer.
Undo the ball stud (2), retrieving the relevant
washer.
Remove the spherical tie-rod (A) and replace it.
Fit the new spherical tie-rod (A) in the correct
direction.
Tighten the ball stud (2) fitting the relevant washer.
Tightening torque
Spherical tie-rod
Tighten the nut (1) fitting the relevant washer.
Tightening torque
Nut
Page 9 of 10
Nm
Class
50 Nm
B
Nm
Class
50 Nm
B
50 Nm
B
Nm
Class
50 Nm
B
Nm
Class
50 Nm
B
Advertisement
Table of Contents
