Air intake manifold
Left-hand side
Tilt the intake manifold slightly to the left in order to
be able to fix the indicated clip, fastening the
power steering fluid pipes (24), onto the metal
bracket.
Left-hand side
Keeping the intake manifold tilted, fix the indicated
clip, fastening the power steering fluid pipes
(24), onto the metal bracket.
Right-hand side
Move the right hand injection cable (22) aside as far
as possible in order to be able to tighten the
intake manifold fasteners.
Take particular care when fitting the intake
manifold. Locating the manifold incorrectly
may deform and compromise the tightness
of the gaskets, causing the "Engine
diagnostic system (EOBD)" warning light to
illuminate.
Tighten the eight indicated screws fastening the
intake manifold (A) to the cylinder head.
Page 11 of 18