Refitting The Complete Engine - Ferrari 458 Italia Technical Documentation Manual

Refitting the complete engine

Print Exit
B2.02 Refitting the complete engine
Refitting the complete engine
Tightening torque
Fastening engine strut - engine mounting bush
Fastening engine mounting bush - chassis
Fastening heat shield - engine mounting bush
Fastening ground cable - engine
Fastening removable subframe to chassis
Fastening heat shield - removable subframe
Fastening U-bracket - removable subframe
Fastening fuel vapour separator mounting bracket -
removable subframe
Fastening engine services cable to terminal block
Fastening front pipe retainer pillory block -
bodyshell
Fastening rigid pipe to power steering pump
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Nut
Screw
Union
On the right-hand side only, fit the engine mounting
bushing (43), the retainer bracket (44) and hand
tighten the three indicated screws.
On the left-hand side only, undo the three screws
indicated fastening the retainer bracket (44) and
the engine mounting bush (43) to the rear
subframe.
Page 1 of 30
Nm Class
15 Nm B
103 Nm A
50 Nm B
9 Nm B
18 Nm B
24 Nm B
9 Nm B
5 Nm B
9 Nm B
15 Nm B
6 Nm B
37 Nm B