Table of Contents
Advertisement
2.8 Replacing the front end module
5. Remove the beads of mastic on the front firewall
(lower area/lateral portions).
Danger!
Danger of poisoning due to fume inhalation!
Risk of injury from skin or eye contact with
adhesive!
Wear breathing protection, protective gloves
and safety glasses.
6. Cut the front firewall, following the floorpan/centre
tunnel weld line.
Caution!
When cutting the front firewall, take the utmost
care not to damage the casting joints on the
centre tunnel.
Copyright ©
2010
5
6
Advertisement
Table of Contents
