3.3 Replacing the complete vehicle flank
Repair sequence
Removing the old part
1. Using the AVDEL gun with the 45 mm C frame,
remove the rivets from the front pillar.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
2. Using the AVDEL gun with the 45 mm C frame,
remove the rivets from the door surround (lower
area) in correspondence with the sill.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
Copyright ©
2010
1
1
1
1
2