Table of Contents
Advertisement
4.5 Replacing the flank mounting bracket
Fitting the new part
NOTE!
Before carrying out the following operation,
mount the rear lateral trellis in the jig and ensure
that it is correctly positioned.
If the trellis appears particularly damaged,
replace the trellis itself (see chapter 3.7).
5. Fit the flank mounting bracket, using the two holes in
the rear lateral trellis as reference.
Prepare the weld area (see chapter 1.14).
Fitting the new part
NOTE!
Before fitting the new part, read chapter (1.15
Repair methods) thoroughly.
6. Fasten the M6 screw in the hole on the rear spar.
Caution!
Do not reuse the screws removed previously.
See paragraph (1.11.3 Screw connections).
Copyright ©
2010
5
6
Advertisement
Table of Contents
