Table of Contents
Advertisement
Dynamic filling (engine on)
02) Undo expansion tank plug (1) and slowly pour
coolant, alternating this operation with repeated
pauses of a few seconds so as to allow the
bleeding of the air present inside system.
03) Pay attention to the passage of coolant inside
vent pipe (2) from engine to expansion tank to
confirm the first filling of engine cooling circuit.
04) Complete filling until reaching the point where
fluid inside expansion tank is at 60 mm from filler
plug top (1) (MAX level), corresponding to about
2 litres of coolant inside expansion tank.
05) Screw plug (1) onto expansion tank.
Advertisement
Table of Contents
