Original Joint Points; Cuts; Sanding - Ferrari 458 Italia Technical Documentation Manual

Hide thumbs Also See for 458 Italia:

Table of Contents

1.4 Important information

1.4.3 Original joint points

• The original joint points are all the weld joints made during

manufacture of the vehicle.

• To ensure crash safety, these joints must be rewelded in

the original positions after a body repair.

• Any methods and procedures that deviate from the original

assembly are described in the Ferrari F458 Italia bodywork

repair manual.

• Cuts must only be made as described by the instructions

given in the Ferrari F458 Italia bodywork repair manual!

• Load-bearing components must only be parted at the original

• Cuts may only be made in the outer skin, as described by

the repair instructions given in this manual.

When grinding weld seams, ensure that the thickness

of the outer panels is maintained or is only slightly