Table of Contents
Advertisement
Tyre pressure monitoring system
Remove the rear element of the wheelhouse only.
Refit the front wheelhouses (
Reconnect the battery (
Replacing rear triggers
Tightening torque
Fastening trigger to mounting bracket
Disconnect the battery (
Right hand rear trigger
Remove the rear wheelhouses (
Remove the rear element of the wheelhouse only.
E3.05).
F2.01).
Screw
F2.01).
E3.05).
Disconnect the connector (1).
Undo the indicated screws fastening the trigger (A)
to the relevant mounting bracket.
Remove the trigger (A) from the relevant mounting
bracket and replace.
Fit the new trigger (A) correctly on the relevant
mounting bracket.
Tighten the indicated screws fastening the trigger
(A) to the relevant mounting bracket.
Tightening torque
Screw
Connect the connector (1).
Page 14 of 20
Nm
Class
9 Nm
B
Nm
Class
9 Nm
B
Advertisement
Table of Contents
