Table of Contents
Advertisement
Removing the complete engine
UP TO Ass.ly No. 90801
Undo the screw indicated and remove the power
steering pump shield (6).
UP TO Ass.ly No. 90801
Undo the union (7) on the power steering pump.
Place a container under the clamp (14).
Loosen the clamp (14) and disconnect the pipe (15)
leading from the expansion tank.
Pour the fluid drained from the system into a
container and seal it. DO NOT DISPOSE OF
USED FLUID IN THE ENVIRONMENT.
Allow all the fluid to drain completely.
Page 5 of 26
Advertisement
Table of Contents
