Table of Contents
Advertisement
Refitting the complete engine
FROM Ass.ly No. 90802
Connect the pipe (13) to the pressure
switch/thermostat and fasten by tightening the
clamp (12).
Connect the pipe (11) to the front timing cover and
fasten by tightening the clamp (10).
Connect the quick connector (9) of the brake servo
vacuum pipe.
FROM Ass.ly No. 90802
Connect the quick connector (16) on the water pipe
leading to the recirculation pump.
Close the indicated clamp.
FROM Ass.ly No. 90802
Connect the quick connector (7) on the power
steering system pipe.
Connect the power steering system pipe (8) and
fasten by tightening the indicated clamp.
Page 13 of 30
Advertisement
Table of Contents
