Table of Contents
Advertisement
2.6 Replacing the wheel bay cover plate
Repair sequence
Removing the old part
1. Remove the internal and external beads of sealant
mastic around the wheel bay cover plate.
Danger!
Danger of poisoning due to fume inhalation! Risk
of injury from skin or eye contact with adhesive!
Wear breathing protection, protective gloves and
safety glasses.
2. Remove the 4 structural rivets from the upper part of
the wheel bay cover plate.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
Copyright ©
2010
1
1
1
1
2
2
Advertisement
Table of Contents
