Table of Contents
Advertisement
Page 02 of 03
Pre-Delivery Inspection - PDI form
Model
Updated on
458 Italia
March 2010
Performed
Performed
R.O.L. N°
OK
NOT OK
(if NOT OK)
23. - Coolant level.
24. - Power steering fluid level.
25. - Braking system fluid level.
26. - Windscreen washer/headlight washer fluid level.
27. - Tyre pressure / calibrated pressure on TPMS.
28. - Tightening of wheel stud bolts.
29. - *Air conditioning and heating system (static test).
30. - *Electric rear-view mirrors.
31. - *RH or LH rear-view mirror – reverse gear engagement
32. - *Parking sensors.
33. - Navigation system: Set route.
34. - Test drive (20 min.).
35. - Air conditioning and heating system (dynamic test).
36. - Engine oil level (warm engine – at idle speed).
37. - Print out of parameters and errors for NCM ECUs, etc.
38. - Verify VIN from NCM parameters
39. - Delete ECU errors.
40. - Enter the warranty start date.
41. - Disconnect and reconnect the battery.
42. - Perform "CAR OUT" procedures
43. - Print Extended Identification
44. - Remove complete aerodynamic flap.
45. - Water and/or oil leaks in vehicle underbody.
46. - Engine compartment lines.
47. - Engine compartment wiring.
48. - Underbody lines.
49. - Exhaust line.
(*) With engine running.
Advertisement
Table of Contents
