Table of Contents
Advertisement
Refitting the complete engine
Remove all the engine hoisting tools installed previously.
Fit the engine on the engine mounting bushes,
aligning the bushes correctly.
On both sides, fit and pretighten the screws (42)
fastening the engine strut to the engine mounting
bush after installing the relevant washer.
Tightening torque
Screw
Fasten the engine mounting bushings (43) and the
retainer brackets (44) tightening the indicated
screws.
Tightening torque
Screw
Tighten the two screws (42) fastening the engine
strut to the engine mounting bushing.
Tightening torque
Screw
Provisionally fit a block (F), as shown in the photo
aside, to prevent the engine from tipping when
the hoisting tools are removed (as described as
follows).
Page 4 of 30
Nm
Class
15 Nm
B
Nm
Class
50 Nm
B
Nm
Class
103 Nm
A
Advertisement
Table of Contents
