Table of Contents
Advertisement
EPB electric parking brake
Disable the EPB electric parking brake Autohold function (
Remove the wheels (
Remove the rear ones.
Remove the brake discs (
Remove the rear ones.
Remove the rear bumper (
D2.01).
D3.03).
E3.04).
D3.07).
Use a suitable screwdriver to prise the clip (1) off
the EPB linkage bracket (A).
Detach the end (2) of the left hand EPB Bowden
cable (D) from the EPB linkage bracket (A).
Press on the two indicated fastener tabs and
remove the left hand EPB Bowden cable sheath
(D) from the relevant mounting bracket.
For the rear right hand brake shoes only
Move the EPB equaliser (C) to the right.
Remove the safety pin (14).
Detach the end (3) of the right hand EPB Bowden
cable (B) from the EPB equaliser (C).
Press on the two indicated fastener tabs and
remove the right hand EPB Bowden cable
sheath (B) from the relevant mounting bracket.
Page 5 of 17
Advertisement
Table of Contents
