Table of Contents
Advertisement
3.3 Replacing the complete vehicle flank
47. Weld the vehicle flank to the rear screen bulkhead
with 4 spot welds.
Apply new corrosion inhibitor to the entire repair
area and then apply a primer coat.
48. Reapply the beads of sealant mastic in the area
surrounding the air intake and the rear screen
(interior/exterior of passenger compartment).
Danger!
Danger of poisoning due to fume inhalation! Risk
of injury from skin or eye contact with adhesive!
Wear breathing protection, protective gloves and
safety glasses.
Copyright ©
2010
47
47
48
48
Advertisement
Table of Contents
