Print Exit
A3.16
Checking injection and ignition system pipes and connections
Checking injection and ignition system pipes and connections
Remove the engine compartment cosmetic shields (
Check the state of the connection pipes between the fuel tank and the high pressure pump, and of the fuel rail
on the intake manifold.
In the event of leakage, replace the pipe and check the system.
Remove the rear wheelhouses (
Check the state of the cables and connectors for the Motronic ECUs and the coils. If the outer casing or the
connector locks are damaged, replace the cable.
In the event of malfunction, check the spark plugs. Replace the spark plugs at the intervals indicated in the
MAINTENANCE SCHEDULE.
E3.13).
E3.05).