2.3 Replacing the front lateral trellis
9. Mount the bracket (A) in the jig and weld at the
original weld points to both the front trellis and the
cross-member.
10. Weld the front trellis to the front spar at the original
weld points.
Caution!
When welding the front lateral trellis, there is a
risk of the spar (A) buckling as a result of the
heat.
To prevent this, the trellis must only be welded
with the front cross-member mounted in the jig
(see chapter 2.4).
Copyright ©
2010
A
9
10
A
9
10