Table of Contents
Advertisement
2.8 Replacing the front end module
Preliminary
Remove connected parts (complete interior, dashboard)
procedures
Remove the fender (see chapter 2.1)
Remove the fender mounting (see chapter 2.2)
Remove the front lateral trellis (see chapter 2.3)
Remove the roof skin (see chapter 3.3)
Remove the windscreen support rib (see chapter 3.4)
Remove the wheel bay cover plate (see chapter 2.6)
Place the vehicle on the vehicle bench.
Replacement parts
•
Front end module (A)
•
Front firewall (B)
•
Lower diagonal braces (C)
•
Upper diagonal braces (D)
•
Underwindscreen covering (E)
•
Wheel bay cover plate (F)
•
Bumper mounting bracket (G)
•
Casting link cross-member (H)
Material necessary
•
4 x M8 screws
•
2 self-piercing rivets (Ø 4.8)
•
9 structural rivets (Ø 6.4)
•
Bicomponent sealant mastic
Copyright ©
2010
E
A
G
B
F
D
C
H
Advertisement
Table of Contents
