3.2 Replacing the windscreen support rib and the windscreen valence cross-member
Repair sequence
Removing the old part
1. Remove the beads of mastic from the lower part of
the underwindscreen rib and the mastic joining the
rib itself to the windscreen valence cross-member.
Danger!
Danger of poisoning due to fume inhalation! Risk
of injury from skin or eye contact with adhesive!
Wear breathing protection, protective gloves and
safety glasses.
2. Sand the internal sections of weld joining the
windscreen valence cross-member with the front
firewall.
NOTE!
Do not remove any other material from the front
firewall.
Copyright ©
2010
1
2