Table of Contents
Advertisement
Suspension arms
Refit the wheels (
D2.01).
Perform the vehicle set-up procedure (
Removing the rear suspension lower arm
The replacement arm is supplied complete with Flanbloc.
The following procedure is for removing the right hand rear suspension lower arm.
The procedure for removing the left hand rear suspension lower arm is the same.
Remove the wheels (
Remove the rear flat undertray section (
Support the weight of the rear suspension adequately.
A3.22).
D2.01).
E3.12).
Check that the yellow reference markings are
correctly aligned: the markings on the stud bolts
and the markings on the Flanbloc eyebolts must
be aligned.
Remove the yellow reference markings made
during removal.
Using an indelible red marker pen or paint, make
reference markings on the stud bolts and relative
nuts and the eyebolts of the Flanblocs fastening
the upper arm.
Page 14 of 24
Advertisement
Table of Contents
