Fuel tank
Refit the passenger compartment trim panels (
Refit the secondary air pump (
Refit the rear subframe (
Add fuel to the tanks.
Reconnect the battery (
Connect the DEIS diagnostic tester to the diagnostic socket (
Perform the "Fuel tank tightness test" cycle.
Removing the right hand fuel tank
Disconnect the battery (
Drain the fuel system (
Remove the rear subframe (
E4.04).
F3.12).
E2.02).
F2.01).
F2.01).
B3.06).
E2.02).
In the passenger compartment, connect the
connector (3).
Fasten the cap (2) in the relative housing.
Fasten the cable grommet (1) on the cap (2).
F2.10).
Page 6 of 12