Silencers
for the left hand cylinder bank exhaust ONLY
Working from the wheel bay, undo the indicated
screw.
Remove the heat shield (10) via the wheel bay.
If necessary, the heat shield (10) may be bent
slightly to facilitate the operation.
Fit the template
(AV
8257) on the flexible part of the
exhaust manifold, as shown in the photo aside.
Fasten the lug (11) onto the relative hook to secure
the template
(AV
8257).
Loosen the clamp (8) between the catalytic
converter and the exhaust manifold.
Remove the template
(AV
Fit the template
(AV
8257) on the flexible part of the
exhaust manifold, as shown in the photo aside.
Fasten the lug (11) onto the relative hook to secure
the template
(AV
8257).
Loosen the clamp (8) between the catalytic
converter and the exhaust manifold.
Page 13 of 20
8257).