Table of Contents
Advertisement
Refitting the complete engine
UP TO Ass.ly No. 90801
Connect the pipe (17) to the front timing cover and
fasten by tightening the clamp (16).
UP TO Ass.ly No. 90801
Fasten the brake servo vacuum pipe (19) in the
relative seat on the pillory block.
Connect the pipe (13) to the pressure
switch/thermostat and fasten by tightening the
clamp (12).
Connect the pipe (11) to the front timing cover and
fasten by tightening the clamp (10).
Connect the quick connector (9) of the brake servo
vacuum pipe (19).
Connect the power steering system pipe (8) and
fasten by tightening the indicated clamp.
UP TO Ass.ly No. 90801
Fit and fasten the bracket (20) onto the pipe retainer
pillory block, tightening the screws indicated.
Tightening torque
Screw
Page 11 of 30
Nm
Class
6 Nm
B
Advertisement
Table of Contents
