Table of Contents
Advertisement
3.1 Replacing the roof skin
7. Using the 50 mm C-frame, remove all the rivets from
the lateral windscreen frame areas.
NOTE!
High strength self-piercing rivets are used for
the high strength steel reinforcements of the A-
pillars.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
8. Remove all the fastener rivets joining the roof skin
and the vehicle flank in the upper door area.
NOTE!
High strength self-piercing rivets are used for
the high strength steel reinforcements of the A-
pillars.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
Copyright ©
2010
7
7
8
Advertisement
Table of Contents
