Table of Contents
Advertisement
Fuel tank
Disconnect the connector (4).
Undo the screw indicated by the red arrow on the
ground cable (5).
Disconnect the pipe (6).
A "double-lock" safety clip is fitted on the union.
To disconnect the "double-lock" quick connector,
using due caution and by pressing on both sides,
push the safety clip out of its seat until you hear
the "unclick".
The difference between the safety clip "clicked"
and "unclicked" position is only a few
millimetres.
Then press on both sides of the quick coupling and
remove the pipe (6).
Undo the indicated fasteners.
Remove the lower heat shield (7).
Undo the screws indicated.
Remove the upper heat shield (8).
Page 2 of 12
Advertisement
Table of Contents
