Table of Contents
Advertisement
2.8 Replacing the front end module
7. Grind the welds between the firewall, floorpan and
centre tunnel.
Caution!
Take the utmost care not to damage the casting
joints on the centre tunnel.
Caution!
Carefully check that there is no evident buckling
on the reinforcements connected to the centre
tunnel.
Fitting the new part
8. Mount the front end module in the jig
(see the jigs used for the shock tower - chapter
2.7).
Warning!
This operation must be carried out with the
assistance of another worker, as there is a risk
of crushing in the event of the front module
falling.
Prepare the weld area (see chapter 1.14).
Copyright ©
2010
7
Advertisement
Table of Contents
