Table of Contents
Advertisement
Engine oil pump
Tighten the six screws indicated fastening the oil
pump (A) onto the crankcase, in the sequence
illustrated in the photo aside.
Tightening torque
Screw
UP TO Engine No. 158940
Push the bushing (5) upward to insert fully in the
crankcase, then fit the Seeger ring (4) in the
relative seat.
When fitting the bushing (5), push against the
loose Seeger ring (4) so as not to damage the
lip of bushing.
FROM Engine No. 158941
Push the bush (5) upwards against the crankcase.
Fit the bracket (4), fastening the bush (5).
Fasten the bracket (4), tightening the indicated
screws.
Tightening torque
Screw
Page 7 of 8
Nm
Class
25 Nm
B
Nm
Class
10 Nm
B
Advertisement
Table of Contents
