Table of Contents
Advertisement
Refitting the complete DCT gearbox
UP TO Ass.ly No. 92289
Fit the left hand tie-rod (12) and fasten by tightening
the screws (10) e (11).
Tightening torque
Screw
Screw
Loosen the nut (C), then unscrew the pin (D) by a
few turns.
Supporting the weight of the tool
the two screws indicated then remove the tool
from under the vehicle.
Fasten the gearbox wiring harness to the chassis,
fitting the clamp and tightening the screw
indicated, then connect the three connectors (8).
Page 7 of 11
Nm
Class
88 Nm
A
24 Nm
A
(AV
8254), undo
Advertisement
Table of Contents
