Fuel tank
Fit the upper heat shield (8).
Hand tighten the screws indicated.
Tightening torque
Screw
Fit the lower heat shield (7).
Tighten the indicated fasteners.
Tightening torque
Screw
Nut
After connecting the quick connector pipe (6)
correctly to the fuel tank, with due caution and
pressing on both sides of the "double-lock" clip
indicated, push the clip into its seat until it clicks
audibly into place and the pipe is secured
correctly.
The difference between the safety clip "unclicked"
and "clicked" position is only a few millimetres.
Connect the connector (4).
Hand tighten the screw indicated by the red arrow
on the ground cable (5).
Page 5 of 12
Nm
Class
9 Nm
B
Nm
Class
9 Nm
B
5 Nm
B