2.2 Replacing the fender mounting assembly
2. Remove the beads of bicomponent sealant mastic
near the three fastener rivets joining the mounting
base and the upper diagonal brace.
Danger!
Danger of poisoning due to fume inhalation! Risk
of injury from skin or eye contact with adhesive!
Wear breathing protection, protective gloves and
safety glasses.
3. Remove the 3 structural rivets joining the
reinforcement base and the upper diagonal brace.
NOTE!
Retrieve all the rivets, using a magnet if
necessary, as any remaining rivets will cause
noise when the vehicle is in use.
Copyright ©
2010
2
3