Table of Contents
Advertisement
Catalytic converter
Adjust the exhaust system (
Refit the engine compartment cosmetic shields (
Refit the rear wheelhouses (
Refit the rear diffuser (
B7.04).
E3.13).
E3.05).
E3.12).
NEVER reuse exhaust system clamps that
have been subjected to operating
temperature. Replace with new components.
Removal and refitting is only permitted with new
clamps for adjustment purposes during initial
installation.
Partially tighten the clamp (2) fastening the catalytic
converter (A) to the silencer (3), by tightening
the relative nut.
Fit and tighten the oxygen sensor (1).
Tightening torque
Oxygen sensor
Page 7 of 7
Nm
Class
50 Nm
B
Advertisement
Table of Contents
