Table of Contents
Advertisement
Tyre pressure monitoring system
Tighten the union (1).
Tightening torque
Union (FROM Ass.ly No.
90802)
Close the indicated clamp on the pipe (2).
Connect the pipe (4) to the rigid pipe (3).
Tighten the clamp (5).
Fit the lower part of the pillory block (7).
Fit the bracket (6) and fasten by tightening the
indicated screws.
Tightening torque
Screws (FROM Ass.ly No.
90802)
Fit a new clamp as indicated by the red arrow.
Tighten the union (8).
Tightening torque
Union (FROM Ass.ly No.
90802)
Fit the lower part of the pillory block (10).
Fit the bracket (9) and tighten the indicated screws.
Tightening torque
Screws (FROM Ass.ly No.
90802)
Page 19 of 20
Nm
Class
26 Nm
B
Nm
Class
6 Nm
B
Nm
Class
20 Nm
B
Nm
Class
6 Nm
B
Advertisement
Table of Contents
