Table of Contents
Advertisement
Draining and filling the engine cooling system
Print Exit
B6.07
Draining and filling the engine cooling system
Draining the cooling system
CAUTION
ALWAYS WORK WHEN THE ENGINE IS COLD.
The fluid contained in the cooling system reaches extremely high temperatures; take the necessary precautions
to prevent burns.
Disconnect the battery (
Remove the front flat undertray section (
F2.01).
E3.12).
UP TO Ass.ly No. 90801 _ Right hand side
Loosen the clamps (1) fastening the connector pipe
(2) onto the rigid pipes.
Undo the screw indicated fastening the rigid pipe.
FROM Ass.ly No. 90802 _ Right hand side
Loosen the clamps (1) fastening the connector pipe
(2) onto the rigid pipes.
Detach the pipe (6) from the clip indicated by the
red arrow.
Undo the screw indicated fastening the rigid pipe.
Page 1 of 5
Advertisement
Table of Contents
